EMC AIX 기본 MPIO 연결

 

 

EMC SURPORT FOR AIX MPIO

 

IBM 자체 MPIO 를 사용 할때 EMC 스토리지에서 WWN 을 인식할때 사용되며

 

 

 

EMC.AIX.6.0.0.3.tar.Z

 

 

 

 

 

[root@backup02:/tmp/EMC]ll
total 31912
drwxr-xr-x  2 hwng hwng      256 May  8 16:55 ./
drwxrwxrwt 36 bin  bin     16384 May  8 17:18 ../
-rw-r--r--  1 hwng hwng 32660032 May  8 15:24 EMC.AIX.6.0.0.3.tar.Z

 

 

[root@backup02:/tmp/EMC]uncompress EMC.AIX.6.0.0.3.tar.Z

 

 

[root@backup02:/tmp/EMC]ls -al
total 56388
drwxr-xr-x  2 hwng hwng      256 May  8 17:18 .
drwxrwxrwt 36 bin  bin     16384 May  8 17:18 ..
-rw-r--r--  1 hwng hwng 57722880 May  8 15:24 EMC.AIX.6.0.0.3.tar

 

 

[root@backup02:/tmp/EMC]tar -xvf EMC.AIX.6.0.0.3.tar
x README.6003, 9653 bytes, 19 tape blocks
x EMC.AIX.6.0.0.3, 57702400 bytes, 112700 tape blocks

 

 

[root@backup02:/tmp/EMC]ls -al
total 112752
drwxr-xr-x  2 hwng hwng      256 May  8 17:18 .
drwxrwxrwt 36 bin  bin     16384 May  8 17:18 ..
-rw-r--r--  1 root sys  57702400 Mar 11 22:24 EMC.AIX.6.0.0.3
-rw-r--r--  1 hwng hwng 57722880 May  8 15:24 EMC.AIX.6.0.0.3.tar
-rwxr-xr-x  1 root sys      9653 Mar 11 22:24 README.6003

 

 

[root@backup02:/tmp/EMC]inutoc .

 

[PROD][root@backup02:/tmp/EMC]ls -al
total 112756
drwxr-xr-x  2 hwng hwng        256 May  8 17:18 .
drwxrwxrwt 36 bin  bin       16384 May  8 17:18 ..
-rw-r--r--  1 root system     3395 May  8 17:18 .toc
-rw-r--r--  1 root sys    57702400 Mar 11 22:24 EMC.AIX.6.0.0.3
-rw-r--r--  1 hwng hwng   57722880 May  8 15:24 EMC.AIX.6.0.0.3.tar
-rwxr-xr-x  1 root sys        9653 Mar 11 22:24 README.6003

 

 

 

[root@backup02:/tmp/EMC]smitty install_latest

 

 

                                                          Install Software

Type or select a value for the entry field.
Press Enter AFTER making all desired changes.

                                                        [Entry Fields]
* INPUT device / directory for software              [.]                                                                         +

 

 

 

 

 아래 3개만 설치하면 됩니다.

 2개만 설치하면 됨 (Support Software 는 출동납니다. AIX 7.1 TL01 기준)

 

+ 6.0.0.3  EMC CLARiiON AIX Support Software

+ 6.0.0.3  EMC CLARiiON FCP MPIO Support Software

+ 6.0.0.3  EMC CLARiiON FCP Support Software

 

 

마지막으로 설정후

#cfgmgr

 

#lsdev -Cc disk 로  확인

 

hdisk75 Available 04-01-02 MPIO Other FC SCSI Disk Drive

위와 같이 나오면 안됨

hdisk74 Available 04-01-02 EMC CLARiiON FCP MPIO RAID 5 Disk <==이게 정상

 

 

설치후

 

queue_depth = 16

algorithm = round_robin

reserved_policy=no

 

로 튜닝~

 

#lsattr -El hdisk75

PCM                 PCM/friend/fcpother                                   Path Control Module              False
PR_key_value    none                                                  Persistant Reserve Key Value     True
algorithm           round_robin                                           Algorithm                                   True
clr_q                no                                                    Device CLEARS its Queue on error     True
dist_err_pcnt       0                                                     Distributed Error Percentage             True
dist_tw_width   50                                                    Distributed Error Sample Time        True
hcheck_cmd      inquiry                                               Health Check Command             True
hcheck_interval 60                                                    Health Check Interval            True
hcheck_mode     nonactive                                             Health Check Mode                True
location                                                              Location Label                   True
lun_id          0x6000000000000                                       Logical Unit Number ID           False
lun_reset_spt   yes                                                   LUN Reset Supported              True
max_retry_delay 60                                                    Maximum Quiesce Time             True
max_transfer    0x40000                                               Maximum TRANSFER Size            True
node_name       0x50060160c4603a7b                                    FC Node Name                     False
pvid            none                                                  Physical volume identifier       False
q_err           yes                                                   Use QERR bit                     True
q_type          simple                                                Queuing TYPE                     True
queue_depth     8                                                     Queue DEPTH                      True
reassign_to     120                                                   REASSIGN time out value          True
reserve_policy  no_reserve                                            Reserve Policy                   True
rw_timeout      30                                                    READ/WRITE time out value        True
scsi_id         0xef                                                  SCSI ID                          False
start_timeout   60                                                    START unit time out value        True
timeout_policy  fail_path                                             Timeout Policy                   True
unique_id       3521360060160F4702800D832FD1EA2B7E21106RAID 503DGCfcp Unique device identifier         False
ww_name         0x5006016944603a7b                                    FC World Wide Name               False

 

 

 

 

 

 맨 오른쪽의 True / False 의 의미는 뭘까요?

 

 True : 변경 가능한 값

False: 변경 불가능한값

 

 그렇다면 속성값을 뭐가 있는지 어떻게 알고 변경할까요?

 

#lsattr -Rl hdisk75 -a algorithm

fail_over
round_robin

 

 변경하는 방법은

 

chdev -l hdisk75 -a algorithm=round_robin

 

 입니다.